pH Monitoring and Control
The ReefKeeper’s pH feature allows the user to monitor pH to 0.01 resolution. A channel can be linked to the pH measurement to control devices that raise and lower pH. Common pH probes are supported and an easy calibration will ensure an accurate reading. We recommend using Pinpoint pH probe (Neptune pH probes not compatible).
Upgradeable Firmware with Free PC Cable Adapter
Customers will be able to update their unit when new software features are released. The serial cable adapter is included with the RK2 system and the firmware update program will be available for free download whenever new software is released. To perform an update you simply press the "Go" button on the firmware update program. Then the program auto-detects the serial port and performs the upload, it`s that easy!
BLUE Backlight LCD & LEDs w/ dimming The ReefKeeper 2 now comes with an even sleeker design employing a blue backlit LCD, blue status LEDs and a black overlay background all standard. Users can set the brightness to 25%, 50%, 75% & 100% as desired.
Manual Override
Each channel has a manual override to allow for quickly turning on/off channels when working with your tank or if you just need to activate your lights for an unexpected visitor.
Digital Light Timer
A light timer can programmed with an on and off time in 15 minute increments. Some or all of the channels can be programmed to be a timer. New! – Lights can now be programmed to turn off when the temperature exceeds a set value.
Night Mode - Independently Programmable
Night mode can be configured independent of your light configuration so that moonlights can be configured to be on at night. You can also disable night mode altogether if desired. |
